Southwark Crown Court was told that on 14 April 2014, 33-year-old labourer Dainius Rupsys from Lithuania was working with an excavator operator at the site on Grosvenor Square in London, as part of the operation to demolish the existing multi-storey building before 31 residential flats could be built.
Rupsys had been burning through reinforcing steel bars with an oxy-propane lance to assist the excavator operator’s efforts to remove part of the re-enforced concrete slab. Another worker had alerted the supervisor that their work had made
the structure unsafe and the demolition was halted. However, the supervisor then ordered the removal of props supporting the remaining slab and less than ten minutes later it collapsed.
The court was told that the 360 excavator may have moved back onto the slab after the props were removed.
Rupsys, the 360 excavator and its operator in the cab all fell with the slab. Rupsys suffered severe head injuries and died at the scene, while the excavator operator injured his back.
Health and Safety Executive (HSE) investigators found that in the weeks before the incident CCTV from overhead cameras showed demolition work had been carried out unsafely, that Rupsys was not adequately trained to use the oxy-propane lance and that he
had no training on using the safety harness, which was not attached when the incident occurred.
McGee Group Ltd, the principal contractor for the project, pleaded guilty to a breach of reg 22(1)(a) of the Construction (Design and Management) Regulations 2007. The company was fined £500,000 plus £66,236 costs.
HSE inspector Andrew Verrall-Withers commented after the hearing: “In the weeks prior to this tragic incident workers were regularly put at an acute risk of falling. This is a case of a company wanting to have good systems to protect the workers,
but not paying enough attention to what was actually happening at the site.
“This young man’s death could have been prevented. Rupsys should not have been allowed to operate an oxy-propane lance. Employers have a duty to check workers have sufficient skills, knowledge, experience and training before they allow
them to use equipment.”